Removal and Installation

Remove the 4 bolts and position aside the lower steering column cover.

Fig 1: Locating Lower Steering Column Cover Bolts
Courtesy of FORD MOTOR CO.
Remove the temperature control knob.
Remove the center instrument panel finish panel.
- Disconnect the cigar lighter electrical connector.
  
  Fig 2: Locating Center Instrument Panel Finish Panel
  Courtesy of FORD MOTOR CO.
Remove the screw and detach the temperature control switch.

Fig 3: Locating Temperature Control Switch Screw
Courtesy of FORD MOTOR CO.
Detach the temperature control cable and remove the temperature selector cable assembly.

Fig 4: Locating Temperature Control Cable
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.