LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System >> Removal And Installation >> Climate Control Assembly >> Removal and Installation

Removal and Installation

  1. Pull the instrument panel console bezel forward and disconnect the electrical connectors.
    Fig 1: Locating Electrical Connectors
    G04653823Courtesy of FORD MOTOR CO.
  2. Detach the temperature and air distribution blend door Bowden cables from the climate control assembly.
    Fig 2: Locating Temperature And Air Distribution Blend Door Bowden Cables
    G04653824Courtesy of FORD MOTOR CO.
  3. Remove the 4 screws and the climate control assembly.
    Fig 3: Locating Climate Control Assembly Screws
    G04653825Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals