LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System >> Removal And Installation >> Blower Motor >> Removal and Installation

Removal and Installation

  1. Remove the RH lower instrument panel insulator.
    Fig 1: Locating RH Lower Instrument Panel Insulator
    G04653812Courtesy of FORD MOTOR CO.
  2. Lower the glove compartment.
  3. Remove screw and the floor duct.
    Fig 2: Locating Floor Duct Screw
    G04653813Courtesy of FORD MOTOR CO.
  4. Close the glove compartment.
  5. Disconnect the blower motor electrical connector.
    Fig 3: Locating Blower Motor Electrical Connector
    G04653814Courtesy of FORD MOTOR CO.
  6. Remove the 3 screws and the blower motor.
    Fig 4: Locating Blower Motor Screws
    G04653815Courtesy of FORD MOTOR CO.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals