Spring Lock Coupling: Disconnect

Remove the spring lock coupling clip, if equipped.

CAUTION: Do not use metal tools to remove the O-ring seals. They can cause axial scratches across the O-ring seal grooves, resulting in refrigerant leaks.

Push the tool into the cage opening to release the female fitting from the spring lock coupling spring and pull the fitting apart.
- Remove the O-ring seals using a non-metallic tool.
  
  Fig 1: Removing O-Ring Seals
  Courtesy of FORD MOTOR CO.

CAUTION: Do not use a screwdriver or similar tool to remove the A/C tube lock coupling spring; this can cause axial scratches across the O-ring seal grooves resulting in refrigerant leaks.

Fig 2: Identifying Spring Lock Coupling Spring

Courtesy of FORD MOTOR CO.

Remove the spring lock coupling spring with a small hooked wire.