LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System-General Information And Diagnosis >> General Procedures >> Air Conditioning Line (Peanut) Fitting >> Connect

Air Conditioning Line (Peanut) Fitting: Connect

  1. Clean all dirt or foreign material from the fittings.
    2. CAUTION: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may result in intermittent leakage during vehicle operation.
    Fig 1: Locating O-Ring Seal
    G04653717Courtesy of FORD MOTOR CO.
  2. Install the O-ring seal.
    3. NOTE: When correctly assembled, the male and female fittings should be flush.
    Fig 2: Locating Male And Female Fittings
    G04653718Courtesy of FORD MOTOR CO.
  3. Assemble the male and female fittings together.
scientia non olet · About LEMON Manuals