Drive Sprocket Alignment No. 10 Thrust Washer
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
DRIVE SPROCKET ALIGNMENT NO. 10 THRUST WASHER
| Description | mm | Inch |
|---|---|---|
| Drive sprocket-to-converter housing thrust washer AA | 1.51-1.41 | 0.059-0.052 |
| Drive sprocket-to-converter housing thrust washer BA | 1.77-1.67 | 0.069-0.065 |
| Drive sprocket-to-converter housing thrust washer CA | 2.03-1.93 | 0.079-0.075 |
| Drive sprocket-to-converter housing thrust washer DA | 2.29-2.19 | 0.090-0.086 |
| Distance measured during gauging procedure and appropriate thrust washer AA | 1.12-0.86 | 0.044-0.033 |
| Distance measured during gauging procedure and appropriate thrust washer BA | 0.85-0.60 | 0.033-0.023 |
| Distance measured during gauging procedure and appropriate thrust washer CA | 0.59-0.34 | 0.023-0.013 |
| Distance measured during gauging procedure and appropriate thrust washer DA | 0.33-0.08 | 0.012-0.003 |