LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Automatic Transmission - Cd4E) >> Diagnostic Tests >> Visual Inspection >> Selector Lever Linkage Check

Selector Lever Linkage Check

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Check for a misadjustment in the selector lever linkage by matching the detents in the transmission range selector lever with those in the transaxle. If they match, the misadjustment is in the indicator. Do not adjust the selector lever linkage.

Hydraulic leakage at the manual control valve can cause delay in engagement and/or slipping while operating if the linkage is not correctly adjusted. Correctly adjust the selector lever linkage. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION EXTERNAL CONTROLS - CD4E article.

scientia non olet · About LEMON Manuals