LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 974 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P0196 - Engine Oil Temperature (EOT) Sensor Circuit Range/Performance

P0196 - Engine Oil Temperature (EOT) Sensor Circuit Range/Performance

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0196 - ENGINE OIL TEMPERATURE (EOT) SENSOR CIRCUIT RANGE/PERFORMANCE

Description:  Indicates the value from the EOT sensor is not within the powertrain control module (PCM) predicted engine oil temperature range, based on other PCM inputs.
Possible Causes: 
  • Engine not at operating temperature
  • Cooling system problem or stuck thermostat
  • EOT circuit failure
Diagnostic Aids:  The EOT rationality test looks for the EOT sensor value to be within a calibrated delta of the PCM predicted engine oil temperature. Make sure the EOT sensor reading is similar to the engine temperature. If the EOT reading greatly differs from engine temperature, check the EOT circuitry for correct operation.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   refer to PINPOINT TEST DY .