LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 974 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P0107 - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor Low

P0107 - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor Low

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0107 - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR LOW

Description:  MAP sensor operating voltage is below the minimum calibrated parameter of 0.25 volts.
Possible Causes: 
  • Open in the circuit, or short to ground
  • VREF circuit open, or short to ground
  • Damaged MAP sensor
Diagnostic Aids:  The VREF voltage should be between 4.0 and 6.0 volts.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   refer to PINPOINT TEST DM .
scientia non olet · About LEMON Manuals