LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 951 (Engine Emission Control - 3.0L (4V)) >> Removal And Installation >> Exhaust Gas Recirculation (EGR) System Components - Exploded View

Exhaust Gas Recirculation (EGR) System Components - Exploded View

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Exhaust Gas Recirculation EGR System Components With Torque Specifications
GF0024485Courtesy of FORD MOTOR CO.
Item Part Number Description
1 14A464 EGR vacuum regulator electrical connector (part of 9H589)
2 - Vacuum tube fitting (part of 9E498)
3 - EGR vacuum regulator stud bolt nut
4 - Wiring harness retainer (part of 9H589)
5 W705779 EGR vacuum regulator stud bolt (2 required)
6 9J459 EGR vacuum regulator
7 14A464 Differential pressure feedback EGR sensor electrical connector (part of 12A522)
8 9J460 Differential pressure feedback EGR sensor
9 - Vacuum tube fitting (part of 9E498)
10 - EGR tube upper fitting (part of 9D477)
11 W500229 EGR valve bolts (2 required)
12 9D475 EGR valve
13 9D476 EGR valve gasket
14 - EGR tube lower fitting (part of 9D477)
15 9D477 EGR tube
  1. For additional information, refer to the following procedures.