Removal And Installation
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
- Remove the brake pads. For additional information, refer to Brake Pads .
- Remove the brake disc.
- If the brake disc binds on the parking brake shoe and lining, remove the adjustment hole access plug and retract the parking brake shoe and lining by rotating the adjuster.
- To install, reverse the removal procedure.
- Adjust the parking brake shoe and lining, if necessary. For additional information, refer to PARKING BRAKE AND ACTUATION article.