LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (Engine - 3.0L (4V)) >> In-Vehicle Servicing >> Valve Spring, Retainer, and Seal >> Installation

Valve Spring, Retainer, and Seal: Installation

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the valve guide with clean engine oil.
  1. Using the special tool, install the valve seal.
    2. Fig 1: Installing Valve Seal
    GF0017057Courtesy of FORD MOTOR CO.
  2. Using the special tool, install the valve spring, retainer and key.
    3. Fig 2: Identifying Special Tool (303-473)
    G03898348Courtesy of FORD MOTOR CO.
  3. Install the camshaft roller followers. For additional information, refer to Camshaft Roller Follower .
scientia non olet · About LEMON Manuals