LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 831 (Anti-Lock Brake System -- F250-F550 Super Duty) >> Removal And Installation >> Wheel Speed Sensor Ring - Front >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front brake disc. For additional information, refer to FRONT DISC BRAKE article.
  2. Use the special tools to remove the front wheel speed sensor ring.
  3. To install, reverse the removal procedure.
    CAUTION: Install a new front wheel speed sensor ring.
    CAUTION: The front wheel speed sensor ring must be pressed on straight.
Fig 1: Front Wheel Speed Sensor Ring Removal
GF0006736Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals