LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 817 (Seat System -- F250-F550 Super Duty) >> Removal And Installation >> Seat Armrest - Bucket, Without Seat Integrated Restraints (SIR) >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Peel the armrest cover to access the bolt and remove the bolt.
    • To install, tighten to 50 Nm (37 lb-ft).
    Fig 1: Locating Armrest Cover Bolt
    GF0004998Courtesy of FORD MOTOR CO.
  2. Remove the armrest.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals