LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 793 (Engine System - General Information - F250-F550 (Gasoline)) >> General Procedures >> Piston Pin Diameter

Piston Pin Diameter

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the piston pin diameter in 2 directions at the points shown. Verify the diameter is within specification.
    • Refer to the appropriate Engine article for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate Engine article for the procedure.
    Fig 1: Measuring Piston Pin Diameter
    GF0000196Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals