Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the nuts.
- To install, tighten to 8 Nm (71 lb-in).
Fig 1: Locating Nuts
Courtesy of FORD MOTOR CO.
Disconnect the vacuum hoses and remove the A/C vacuum reservoir tank and bracket.

Fig 2: Removing A/C Vacuum Reservoir Tank And Bracket
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.