LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 739 (Engine Emission Control System - F-150 & Mark LT) >> Removal And Installation >> Exhaust Gas Recirculation (EGR) System Module - 4.6L (2V) >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the exhaust gas recirculation (EGR) system module electrical connector.
  2. Disconnect the EGR system module vacuum connector.
  3. Disconnect the exhaust manifold-to-EGR system module tube from the EGR system module.
  4. Remove the bolts, the EGR system module and the gasket. Discard the gasket.
scientia non olet · About LEMON Manuals