LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 725 (Climate Control - F-150 & Mark LT) >> Description And Operation >> Control Components >> Electronic Automatic Temperature Control >> Control System Inputs >> In-Vehicle Temperature Sensor

In-Vehicle Temperature Sensor

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

An in-vehicle temperature sensor is used by the EATC module to measure air temperature inside the passenger compartment. An aspirator hose and elbow is connected between the heater core housing and the in-vehicle temperature sensor. Air flow through the heater core and evaporator core housing causes a venturi-type suction through the aspirator hose which draws passenger compartment air across the thermistor in the in-vehicle temperature sensor.

scientia non olet · About LEMON Manuals