Exhaust System - Exploded View

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

F-150 and Mark LT

NOTE: Exhaust system may vary by engine and wheelbase.

NOTE: 5.4L shown, 4.6L and 4.2L similar.

Fig 1: Exploded View Of Exhaust System With Specifications (F-150 And Mark LT)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	5E212	RH catalytic converter
2	-	Exhaust clamp
3	5E212	LH catalytic converter
4	5A281	Exhaust coupler
5	5A212	Exhaust intermediate pipe
6	-	Exhaust clamp (part of 5A212)
7	5230	Muffler
8	-	Exhaust clamp
9	-	Exhaust tip (Mark LT only)
10	W709736	Exhaust hanger bracket bolts (4 required)
11	5E269	Exhaust Y-pipe - dual catalytic converter hanger bracket
12	-	Exhaust Y-pipe - dual catalytic converter isolator (part of 5E269)
13	5B245	Exhaust hanger bracket and isolator (front muffler)
14	5A242	Exhaust hanger bracket and isolator (rear muffler)
15	5260	Exhaust hanger bracket and isolator (tailpipe)
16	9F472	Heated oxygen sensors (2 required)
17	9F472	Catalyst monitor sensors (2 required)
18	W505436	Exhaust Y-pipe - dual catalytic converter hanger bracket and isolator bolt (2 required)

Harley Davidson

Fig 2: Exploded View Of Exhaust System With Specifications (Harley Davidson)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	5E212	RH catalytic converter
2	-	Exhaust clamp
3	5E212	LH catalytic converter
4	5A281	Exhaust coupler
5	5A212	Exhaust intermediate pipe
6	-	Exhaust clamp (part of 5A212)
7	5230	Muffler
8	-	Exhaust clamps
9	-	Exhaust tips
10	W709736	Exhaust hanger bracket bolts (4 required)
11	5E269	Exhaust Y-pipe-dual catalytic converter hanger bracket
12	-	Exhaust Y-pipe-dual catalytic converter isolator (part of 5E269)
13	5B245	Exhaust hanger bracket and isolator (front muffler)
14	5A242	Exhaust hanger bracket and isolator (rear muffler)
15	5260	Exhaust hanger bracket and isolator (tailpipe)
16	9F472	Heated oxygen sensors (2 required)
17	9F472	Catalyst monitor sensors (2 required)
18	W505436	Exhaust Y-pipe - dual catalytic converter hanger bracket and isolator bolt (2 required)

For additional information, refer to the procedures in this information.