LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 703 (Engine - 4.2L - F-150) >> In-Vehicle Servicing >> Engine Support Insulators >> RH side

RH side

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Clean the engine support insulator-to-bracket mating surfaces and the bolt holes in the bracket of any dirt or foreign material prior to installation.
  1. Remove the bolts and the RH engine support insulator.
    • Apply Threadlock 262 to the bolts threads prior to installation.
    • To install, tighten to 115 Nm (85 lb-ft).
scientia non olet · About LEMON Manuals