LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 703 (Engine - 4.2L - F-150) >> Disassembly And Assembly Of Subassemblies >> Piston >> Disassembly

Disassembly And Assembly Of Subassemblies: Piston: Disassembly

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the piston rings.
    Fig 1: Identifying Piston Rings
    GF0002546Courtesy of FORD MOTOR CO.
  2. Using the special tool, press the piston pin out of the connecting rod and piston assembly.
    Fig 2: Pressing Piston Pin Out Of Connecting Rod And Piston Assembly
    GF0002547Courtesy of FORD MOTOR CO.
  3. Remove the connecting rod from the piston.
    Fig 3: Removing Connecting Rod From Piston
    GF0002548Courtesy of FORD MOTOR CO.
  4. Clean and inspect the connecting rod and piston. For additional information, refer to ENGINE SYSTEM - GENERAL INFORMATION article.
scientia non olet · About LEMON Manuals