Oil Temperature Sensor - 4.6L (2V)
WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification |
|---|---|
| Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent |
WSS-M2C930-A |
| Item | Part Number | Description |
|---|---|---|
| 1 | 14A464 | Engine oil temperature sensor electrical connector |
| 2 | 6C627 | Engine oil temperature sensor |
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
- Remove the oil drain plug and drain the engine oil.
- To install, tighten to 23 Nm (17 lb-ft).
- Disconnect the oil temperature sensor electrical connector.
- Remove the oil temperature sensor.
- To install, tighten to 21 Nm (15 lb-ft).
- To install, reverse the removal procedure.