LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 702 (Electronic Engine Control System - F-150 & Mark LT) >> Removal And Installation >> Fuel Rail Pressure and Temperature Sensor - 4.2L >> Notes

Fuel Rail Pressure and Temperature Sensor - 4.2L: Notes

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent
WSS-M2C930-A
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly flammable mixtures are always present and can be ignited. Failure to follow these instructions may result in personal injury.
WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before working on or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved. Failure to follow these instructions may result in personal injury.
Fig 1: Identifying Fuel Rail Pressure And Temperature Sensor - 4.2L Components
GF0002938Courtesy of FORD MOTOR CO.
Item Part Number Description
1 14A464 Fuel rail pressure and temperature sensor electrical connector
2 9E498 Fuel rail pressure and temperature sensor vacuum connector
3 W705870 Fuel rail pressure and temperature sensor bolts (2 required)
4 9G756 Fuel rail pressure and temperature sensor
5 - Fuel rail pressure and temperature sensor O-ring seal