LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 689 (Engine - 4.6L (2V) - F-150) >> In-Vehicle Servicing >> Hydraulic Lash Adjuster >> Removal

Hydraulic Lash Adjuster: Removal

WARNING: This page is about a different car, the 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the camshaft roller followers. For additional information, refer to Camshaft Roller Follower  in this article.
    2. NOTE: Each hydraulic lash adjuster is positional. Mark each hydraulic lash adjuster for installation in its original location.
  2. Remove the hydraulic lash adjusters.
    3. Fig 1: Locating Hydraulic Lash Adjusters
    GF0000287Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals