LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 668 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P0722 - Output Shaft Speed (OSS) Sensor Circuit No Signal

P0722 - Output Shaft Speed (OSS) Sensor Circuit No Signal

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2007 Mercury Mountaineer, 2007 Mercury Monterey, 2007 Mercury Montego, 2007 Mercury Milan, and 2007 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0722 - OUTPUT SHAFT SPEED (OSS) SENSOR CIRCUIT NO SIGNAL

Description:  The OSS sensor failed to provide a signal to the PCM upon initial movement of vehicle.
Possible Causes: 
  • Damaged OSS connector
  • Damaged OSS sensor, or not installed properly
  • Harness intermittently shorted or open
Diagnostic Aids:  Check the wiring, connector, and sensor for damage.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
Manual transmission - - refer to PINPOINT TEST DP .
All others Refer to the appropriate AUTOMATIC TRANSMISSION/TRANSAXLE article.