LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 668 (Engine Controls - Powertrain DTC Charts And Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> P0107 - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor Low

P0107 - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor Low

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2007 Mercury Mountaineer, 2007 Mercury Monterey, 2007 Mercury Montego, 2007 Mercury Milan, and 2007 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0107 - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR LOW

Description:  MAP sensor operating voltage is below the minimum calibrated parameter of 0.25 volts.
Possible Causes: 
  • Open in the circuit, or short to ground
  • VREF circuit open, or short to ground
  • Damaged MAP sensor
Diagnostic Aids:  VREF should be greater than 4.0 volts. The PID reading is in frequency/volts.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All refer to PINPOINT TEST DM .
scientia non olet · About LEMON Manuals