Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Open the storage compartment cover and remove the 2 screws.

Fig 1: Locating Storage Compartment Cover Screws
Courtesy of FORD MOTOR CO.
Disconnect the overhead console electrical connectors.
Disengage the clips and remove the switch from the overhead console.

Fig 2: Locating Overhead Console Electrical Connectors Pin And Switch
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.