Speaker Walk-Around Test
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To enter the speaker walk-around test or audio unit self-diagnostic mode, the audio unit must be on and in radio tuner mode (AM/FM).
- To enter the speaker walk-around test, simultaneously press the audio unit preset buttons 3 and 6.
- The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1 to 2 seconds. Each speaker is tested and displayed on the audio unit in the following sequence: RF, LF, LR, RR, SUBWOOFER, and CENTER IMAGE (THX® only).
- To exit the speaker walk-around test, turn the key OFF, turn the audio unit off, or press preset button 1 for diagnostics (DIA).