LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 651 (Automatic Transaxle/Transmission - FNR5) >> In-Vehicle Repair >> Halfshaft Seal - RH >> Installation

Halfshaft Seal - RH: Installation

WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the new differential fluid seal on the special tools.
    Fig 1: Identifying Special Tools And Differential Fluid Seal
    G04681823Courtesy of FORD MOTOR CO.
  2. Using the special tools, install the halfshaft seal.
    Fig 2: Identifying Special Tools
    G04681824Courtesy of FORD MOTOR CO.
  3. Install the RH halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS .
scientia non olet · About LEMON Manuals