LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 641 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Remote Keyless Entry Keypad >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the grommet.
  2. Using a suitable tool, release the rear RKE keypad retaining clip and position the RKE keypad aside.
  3. Remove the RKE keypad.
    • Disconnect the electrical connector.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals