LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 641 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Ignition Lock Cylinder >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the passive anti-theft system (PATS) transceiver. For additional information, refer to ANTI-THEFT - PATS .
  2. Turn the ignition key to the ON position.
  3. Using a suitable tool, press the ignition lock cylinder release button and remove the ignition lock cylinder.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals