LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Automatic Transmission -- F250-F550 Super Duty) >> In-Vehicle Repair >> Solenoid Body Assembly >> Removal

Solenoid Body Assembly: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid pan, gasket and filter. For additional information, refer to FLUID PAN, GASKET AND FILTER .
    Fig 1: Identifying Solenoid Body Electrical Connector
    G03889052Courtesy of FORD MOTOR CO.
  2. Disconnect the solenoid body electrical connector.
    3. NOTE: While lowering the solenoid body, the manual valve may fall out of the solenoid body.
    Fig 2: Removing The Solenoid Body
    G03889053Courtesy of FORD MOTOR CO.
  3. Remove the solenoid body.
    1. Disconnect the transmission range sensor electrical connector.
    2. Remove the solenoid body bolts.
    3. Remove the solenoid body.
  4. Remove the solenoid body gasket.
    Fig 3: Removing Solenoid Body Gasket
    G03889054Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals