LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Automatic Transmission -- F250-F550 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Forward GEARTRAIN Assembly - Assembly >> Assembly

Forward GEARTRAIN Assembly - Assembly: Assembly

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the forward clutch assembly into the direct clutch assembly.
    Fig 1: Installing Forward Clutch Assembly Into Direct Clutch Assembly
    G03889476Courtesy of FORD MOTOR CO.
  2. Install the No. 9 forward clutch bearing.
    Fig 2: Installing No 9 Forward Clutch Bearing
    G03889477Courtesy of FORD MOTOR CO.
  3. Install the forward hub and ring gear assembly.
    Fig 3: Installing Forward Hub And Ring Gear Assembly
    G03889478Courtesy of FORD MOTOR CO.
  4. Install the planet carrier and bearing assembly.
    Fig 4: Installing Planet Carrier And Bearing Assembly
    G03889479Courtesy of FORD MOTOR CO.
  5. Install the No. 12 thrust bearing onto the forward carrier assembly.
    Fig 5: Installing No 12 Thrust Bearing Onto Forward Carrier Assembly
    G03889480Courtesy of FORD MOTOR CO.
  6. Install the input shell assembly.
    • Make sure the tab is engaged in the forward clutch assembly.
      Fig 6: Installing Input Shell Assembly
      G03889481Courtesy of FORD MOTOR CO.
  7. Install the special tools. Position aside to use during transmission assembly.
    Fig 7: Installing Special Tools
    G03889482Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals