LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 609 (Acceleration Control) >> Removal And Installation >> Accelerator Pedal and Bracket >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the accelerator pedal sensor electrical connector.
  2. Remove the 2 nuts and the accelerator pedal and bracket.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals