LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 607 (Engine System-General Information) >> Diagnosis And Testing >> Engine >> Valve Train Analysis - Engine Off, Valve Cover Removed >> Valve Train Analysis - Engine Off, Valve Tappet

Valve Train Analysis - Engine Off, Valve Tappet

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Valve tappet noise can be caused by any of the following:

Excessive collapsed valve tappet shim gap can be caused by incorrect initial adjustment or wear of valve tappet shim face.

Refer to the valve train shim and gap inspection procedure in the appropriate engine article.

scientia non olet · About LEMON Manuals