LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (HVAC Control System - General Information & Diagnostics) >> General Procedures >> Air Conditioning Line (Peanut) Fitting >> Connect

Air Conditioning Line (Peanut) Fitting: Connect

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all dirt or foreign material from the fittings.
  2. CAUTION: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may result in intermittent leakage during vehicle operation.
    Fig 1: O-Ring Seal
    G04657966Courtesy of FORD MOTOR CO.
  3. Install the O-ring seal.
  4. NOTE: When correctly assembled, the male and female fittings should be flush.
    Fig 2: Peanut Fitting Nut
    G04657967Courtesy of FORD MOTOR CO.
  5. Assemble the male and female fittings together.