LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Charging System (Battery, Mounting And Cables)) >> Removal And Installation >> Battery Tray >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery. For additional information, refer to BATTERY  .
  2. Disconnect the battery cable harness locators from the battery tray.
  3. Remove the 4 bolts and the battery tray.
    • To install, tighten to 23 N.m (17 lb-ft).
  4. To install, reverse the removal procedure.