LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 535 (Uni-Body, SUBFRAME And Mounting System) >> Removal And Installation >> Subframe Bushings >> Installation

Subframe Bushings: Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the special tools to the front subframe with the new subframe bushing.
    Fig 1: Identifying Special Tools On Subframe Bushing
    G04659826Courtesy of FORD MOTOR CO.
  2. Align the subframe bushing to the front subframe.
    1. Align the subframe bushing so that the voids are oriented in the fore-aft position.
    Fig 2: Aligning Subframe Bushing
    G04659827Courtesy of FORD MOTOR CO.
  3. Press the new subframe bushing into the front subframe.
  4. Install the front subframe. For additional information, refer to SUBFRAME - FRONT .
scientia non olet · About LEMON Manuals