LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 483 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Push Button Rod - Front Door >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Position the watershield aside.
  3. Remove the push button rod retaining clip.
  4. Release the front door latch clip and remove the push button rod.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals