LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 483 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Lock Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The left front door with power windows and power mirror is shown. The other doors and vehicles without power windows or power mirrors are similar.
    Fig 1: Removing Door Command Center
    G04646484Courtesy of FORD MOTOR CO.
  1. Remove the door command center enough to gain access to the electrical connectors.
  2. Disconnect the electrical connectors.
  3. Remove the door command center.
  4. Release the front and back retaining clips on the door lock control switch and remove the switch.
    Fig 2: Releasing Front And Back Retaining Clips On Door Lock Control Switch
    G04646485Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals