Removal and Installation
WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Position the steering wheel in the lowest position.
- Carefully pull out the instrument cluster finish panel enough to gain access to the back of the headlamp switch.
- Reach behind the instrument cluster finish panel and release the headlamp switch from the instrument cluster finish panel.
- Disconnect the electrical connectors.
- To install, reverse the removal procedure.
NOTE:
Feel for flat surfaces on the headlamp switch and push the switch outward until the headlamp switch pops out.