LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (HVAC Control System - F250-F550 Super Duty) >> Removal And Installation >> Floor Duct >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the plenum chamber. For additional information, refer to PLENUM CHAMBER .
  2. Remove the 3 screws and remove the heater outlet floor duct.
    Fig 1: Locating Heater Outlet Floor Duct Screw
    G04645248Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals