Cooling System Flushing
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL CHART
| Item | Specification |
|---|---|
| Premium Cooling System Flush VC-1 | ESR-M14P7-A |
- Once pressure is released, remove the pressure relief cap.
Drain the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
- Remove the coolant thermostat.
- Install the coolant hose connection without the coolant thermostat.
- Use an appropriate cooling system flusher to flush the engine and radiator.
Use Premium Cooling System Flush or equivalent.
- Install the coolant thermostat. For additional information, refer to THERMOSTAT - 5.4L, 6.8L or THERMOSTAT - 6.0L DIESEL .
- Backflush the heater core if necessary. For additional information, refer to HEATER CORE BACKFLUSHING .
- Fill the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
WARNING:
To avoid personal injury, do not unscrew the coolant pressure relief cap while the engine is operating or hot. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly.
NOTE:
Refer to the cooling system flusher manufacturer's operating instructions for specific vehicle hook-up.