LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 419 (Jacking & Lifting - F250-F550 Super Duty) >> Description And Operation >> Lifting >> Lifting Points

Lifting Points

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: When raising a vehicle on a twin-post hoist, use extreme care positioning the hoisting forks to avoid interference with the plastic midship fuel tank.
CAUTION: When raising a vehicle on a twin-post hoist, use care when positioning the vehicle so that the hoisting forks do not interfere with the shock absorber mounting brackets or stabilizer mounting brackets, if so equipped, or damage the axle carrier or rear cover.
CAUTION: Damage to suspension, exhaust and steering linkage components can occur if care is not exercised when positioning the hoist adapters prior to lifting the vehicle.

Front Lifting Points - 4x2 

Fig 1: Identifying Lifting Points (Front Lifting Points - 4x2)
G04642990Courtesy of FORD MOTOR CO.

Front Lifting Points - 4x4 

Fig 2: Identifying Lifting Points (Front Lifting Points - 4x4)
G04642991Courtesy of FORD MOTOR CO.

Rear Lifting Points 

Fig 3: Identifying Rear Lifting Points
G04642992Courtesy of FORD MOTOR CO.

Hoist adapters for heavy-duty hoists must be positioned according to the hoist manufacturer's recommendations. Make sure the hoist has an adequate lifting capacity for the vehicle being lifted.