LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 397 (Automatic Transmission External Controls - Cd4E) >> Diagnosis And Testing >> External Controls >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the system.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Kinked or bound shift cable
    • Gearshift lever out of adjustment
    • Battery junction box (BJB) fuse
    • Smart junction box (SJB) fuses
    • Brake shift interlock diode
    • Wiring harness
    • Loose or corroded connections
    • Brake pedal position (BPP) switch
    • Brake shift interlock actuator
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the concern is not visually evident, verify the symptom and refer to the SYMPTOM CHART .