LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 389 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Remote Keyless Entry Keypad >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Position the watershield aside.
  3. Remove the RKE keypad retaining clip.
  4. Remove the RKE keypad from the door.
    • Disconnect the electrical connector.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals