Removal and Installation
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Escape shown, Mariner similar. LH side shown, RH side similar.
- Remove the front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- Remove the 3 screws and the front door trim panel arm rest.
- Release the bezel retaining clip from the door trim panel.
- Release the locking clips and remove the window control switch.
- To install, reverse the removal procedure.
All vehicles
Mariner
All vehicles