Brake Drum: Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Using the special tool, measure the inside diameter of the brake drum.
- Install a new brake drum if the inside diameter exceeds the specification stamped on the outside face of the brake drum.
  
  Fig 1: Measuring Inside Diameter Of Brake Drum Using Special Tool
  Courtesy of FORD MOTOR CO.
Adjust the rear brakes, refer to BRAKE SHOE ADJUSTMENT .
Position the brake drum on the vehicle.