Differential Seals - LH: Removal
WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in DRIVE, position it on a hoist. For additional information, refer to JACKING & LIFTING .
- Turn the ignition to the OFF position.
- Remove the retainers and remove the LH splash shield.
- Remove the drain plug and drain the fluid.
- Remove the LH halfshaft.
- Using the special tools, remove and discard the LH differential seal.