LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 343 (Automatic Transmission - Cd4E) >> Disassembly And Assembly Of Subassemblies >> Low One-Way Clutch Assembly >> Assembly

Low One-Way Clutch Assembly: Assembly

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Outer tabs of the roller assembly must face up.
    Fig 1: Locating Roller Assembly
    G04620275Courtesy of FORD MOTOR CO.
  1. Install the roller assembly into the outer race with the groove facing up.
    2. NOTE: To aid in inner race installation, rotate the inner race clockwise during installation.
    Fig 2: Locating Inner Race With Grooves Facing Up
    G04620276Courtesy of FORD MOTOR CO.
  2. Install the inner race with the grooves facing up.
  3. Check the operation of the one-way clutch as follows:
    1. Hold the outer race.
    2. Rotate the inner race clockwise. It should rotate with a slight drag without attempting to rotate the outer race.
    3. Rotate the inner race counterclockwise. The inner race should rotate the outer race.
      Fig 3: Rotating Inner Race
      G04620277Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals